2000 * 3500mm Marine inflatable floating pneumatic boat fender with aircraft tyre net Net type and Sling type manufacturer from China Shandong Nanhai Airbag Engineering Co., Ltd.

2000 * 3500mm Marine inflatable floating pneumatic boat fender with aircraft tyre net

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Net type and Sling type

2000*3500mm Marine inflatable floating pneumatic boat fender with aircraft tyre net

2000*3500mm Marine inflatable floating pneumatic boat fender with aircraft tyre net

Description:

Pneumatic Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships or between ships and berthing structures when they come alongside each other on the water.

Applicant:
1.ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes, accompanied by wind and waves.Adopt pneumatic fender as side of the buffer, not only make heavy berthing becomes easy, and improve the efficiency of the transportation operations. Pneumatic fender is mainly used for: Ice in the Antarctic ocean fishing ships, large oil tanker berthing.
2. Used for terminal dock protection
Of the ship is very large, the cause of berthing impact energy have multiplied.Inflatable rubber fender because of its high energy absorption and low reaction force features are widely used.

Pneumatic fender selection:

Vessel Tonnage	Size (D*L) mm	Recommend Vessel
50	500*1000	Fishing Vessel
100	7001500~10001500	Fishing Vessel
200	10001500~12002000	Fishing Vessel, Tugboat
300-500	12002000~15002500	Fishing Vessel, Tugboat
1000	15002500~15003000	Tugboat, Transport Ship
3000	20003000~20003500	Ocean Trawler, Transport Ship
10000	20003500~25004000	Transport Ship

Feature:
1, high safety level: our pneumatic fenders can stand the maximum pressure up to 4 times that the operating pressure
2, easy maintenance: our fenders just need inflation once every six months
3, low transportation cost: our fenders can be deflated and folded for transportation, thus saving about two thirds of the transportation cost
4, long lifespan: it is guaranteed that our fenders can be used for 10 years under normal conditions.

Maintenance:
1.Internal pressure adjustment
Fender pressure should be kept in the standard air pressure in the± 5% range, and once every three months to check air pressure, deflated or fill gas up to standard in a timely manner.
2. safety knowledge
a. Avoid touching the sharp things
b. when Long time not use, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.
c. Storage place away from heat, acid and alkali, oil and grease

Specification:

Diameter(m)	Length(m)	Internal pressure (Kpa)	Energy Absorption(KNM)	Reaction Force(KN)
0.5	1.0	50	6	64
0.7	1.5	50	17	137
1.0	1.5	50	32	182
1.0	2.0	50	45	257
1.2	2.0	50	63	297
1.35	2.5	50	102	427
1.5	3.0	50	191	579
1.7	3.0	50	102	639
2.0	3.5	50	308	875
2.5	4.0	50	663	1381
2.5	5.5	50	943	2019
3.3	4.5	50	1175	1884
3.3	6.5	50	1814	3015