50 kpa Floatingpneumaticrubberfenderinstalled on the wharf for berthing 3.3 D X 6.5 L manufacturer from China Shandong Nanhai Airbag Engineering Co., Ltd.

50 kpa Floatingpneumaticrubberfenderinstalled on the wharf for berthing

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 3.3 D X 6.5 L

Floating pneumatic rubber fender installed on the wharf for berthing with 50 kpa
&nb

Floating pneumatic rubber fender installed on the wharf for berthing with 50 kpa

Penumatic rubber fender with chain protection

(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. NANHAI AIRBAG rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.

(2) Ultra low back pressure
The inside air of NANHAI AIRBAG pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of NANHAI AIRBAG sea inflatable fender, its adaptability is much higher than other fender.

pneumatic marine rubber fender Construction

The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.

To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.

The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.

Floating Pneumatic Rubber Fenders specifications

The standard specification of ship rubber fender
You can choose the required diameter and effective length to meet your projects
(1)Diameter: from 500mm to 4500mm
(2)Effective length: from 1000mm to 12000mm
The above specifications only are our standard specifications arrange. Can be supplied customized size upon customers' request.

floating pneumatic rubber fender Specifications and sizes :

Material test of rubber - Conducted in accordance with the Physical properties of inner and outer rubber required by ISO 17357: 2002

Dimensional inspection - Shall be inspected at the initial internal pressure. Tolerance: +10%, -5%.

Vessel Tonnage	Size (D*L) mm	Recommend Vessel
50	500*1000	Fishing Vessel
100	7001500~10001500	Fishing Vessel
200	10001500~12002000	Fishing Vessel, Tugboat
300-500	12002000~15002500	Fishing Vessel, Tugboat
1000	15002500~15003000	Tugboat, Transport Ship
3000	20003000~20003500	Ocean Trawler, Transport Ship
10000	20003500~25004000	Transport Ship

Performance characteristics of Floating Pneumatic Rubber Fenders

(1)Ship rubber fender is with the use of high quality rubber nylon cord.
(2) Using compressed air as damping medium, the rubber can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy.
(3) When berthing, the ship is almost at a certain angle, the ship rubber fender can realize contact in a certain angle by bringing full play to its performance.
(4) Floating on the water surface, even the ship fluctuates and sways resulting from ebb and flow and waves, the pneumatic

Our floating pneumatic rubber fenders

Nanhai Airbag is one of the world largest manufacturers of ship marine pneumatic yokohama fenders - all supplied to ISO 17357 standard. In addition to,Yokohama floating fenders, we are able to offer a wide variety of sizes and specification to meet your needs from baby floating pneumatic yokohama fenders to large dimension.Our own brand of Nanhai No.1 marine pneumatic yokohama fenders.