Black Yokoahama Type Floatingpneumatic rubberfender D3.3m x L6.5m 3.3 D X 6.5 L manufacturer from China Shandong Nanhai Airbag Engineering Co., Ltd.

Black Yokoahama Type Floatingpneumatic rubberfender D3.3m x L6.5m

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 3.3 D X 6.5 L

Black Yokoahama Type Floating pneumatic rubber fenders D3.3m x L6.5m
</p

Black Yokoahama Type Floating pneumatic rubber fenders D3.3m x L6.5m

floating pneumatic rubber fender information

The performance of floating pneumatic rubber fenders shall be specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.

All NANHAI AIRBAG floating pneumatic rubber fenders are manufactured and third party (ABS, LR, BV, CCS) certified in compliance with ISO 17357: 2002.

floating pneumatic rubber fender Specifications and sizes :

Material test of rubber - Conducted in accordance with the Physical properties of inner and outer rubber required by ISO 17357: 2002

Dimensional inspection - Shall be inspected at the initial internal pressure. Tolerance: +10%, -5%.

Vessel Tonnage	Size (D*L) mm	Recommend Vessel
50	500*1000	Fishing Vessel
100	7001500~10001500	Fishing Vessel
200	10001500~12002000	Fishing Vessel, Tugboat
300-500	12002000~15002500	Fishing Vessel, Tugboat
1000	15002500~15003000	Tugboat, Transport Ship
3000	20003000~20003500	Ocean Trawler, Transport Ship
10000	20003500~25004000	Transport Ship

Advantages of Floating Pneumatic Rubber Fenders

Floating pneumatic rubber fenders can be easily handled and installed with guy-rope or guy-chain because of its light weight. It can resist the shearing force and maintain energy absorption level under inclined compressionup to 15 degrees. Meanwhile, provide the low and comparatively even hull pressure.

Consisted of several synthetic-cord layers and tough abrasion resistant out rubber, they have consistent performance even under rough condition and cyclic load. The maintenance cost and damage risk are minimised too. The best material also ensure the self-buoyancy and extremely long service life.

pneumatic marine rubber fender Construction

The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.

To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.

The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.

Our floating pneumatic rubber fenders

Nanhai Airbag is one of the world largest manufacturers of ship marine pneumatic yokohama fenders - all supplied to ISO 17357 standard. In addition to,Yokohama floating fenders, we are able to offer a wide variety of sizes and specification to meet your needs from baby floating pneumatic yokohama fenders to large dimension.Our own brand of Nanhai No.1 marine pneumatic yokohama fenders.